Engine Block Cleanser Brigéciol D3 1L
It can be used in a number of work areas: cleaning of car chassis, engine, component for cleaning agricultural work and power plants, railway tanks and underground tanks, and in the engineering industry to remove the remaining metal and removal. It can be used for cleaning equipment, where the task is to remove the residues of oily-fat-fried muds and deposits separately or separately. Preferably applicable to degrease of dishes treated with temporary protective oil before processing
Add it with a spray gun, dip, brush to the surface to be cleaned in such a quantity so that the dirt is soaked and then, after a wait 10-20 minutes, remove the dirt with a jet of water. The preparation cleanses the surface of the structural materials, especially the metal surfaces in such a way that it emulsifies oily, greasy deposits, thus making it water -soluble and removing inorganic impurities with adhesive effects.
The sewage produced after washing contains mineral oil in the form of emulsion, which is partly from the cleaned surface to the detergent to the washing water. The composition of Brigéciol D3 was designed so that the emulsion resulting can be easily, cheaply demulled with domestic products. According to our high -profile experience, in factories with a given wastewater treatment technology, the emulsion will be separated after 1-2 hours after administration and mixing of aluminum sulfate or calcium chloride at 200 to 300 g/m3. Oil on the surface of the water can be levied. After collecting the autumn, it can be sold as a burned oil. Of course, all users need to develop an oily wastewater treatment technology that can be used for a given local conditions. After emulsion breakdown and skim, the washing water organic matter is below 10mg/liter. This washing water can be recycled or drained into a drain.
Quantitative unit: pcs

English name: Engine Cleaner Liq. D3